ISO 5269-1-1998 纸浆物理试验用实验室浆张的制备第1部分:常规纸页成型法
作者:标准资料网 时间:2024-05-10 04:32:01 浏览:9000
来源:标准资料网
【英文标准名称】:Pulps-Preparationoflaboratorysheetsforphysicaltesting-Part1:Conventionalsheet-formermethod
【原文标准名称】:纸浆物理试验用实验室浆张的制备第1部分:常规纸页成型法
【标准号】:ISO5269-1-1998
【标准状态】:作废
【国别】:国际
【发布日期】:1998-08
【实施或试行日期】:
【发布单位】:国际标准化组织(ISO)
【起草单位】:ISO/TC6
【标准类型】:()
【标准水平】:()
【中文主题词】:物理试验;纸浆;纸浆;物理的;试样;试验;试样制备;板;测定;试验;特性;物理性能
【英文主题词】:physicaltesting;specimenpreparation;testing;fibres;tests;testspecimens;physicalproperties;physical;properties;production;plates;pulp;paperpulp;sheets;laboratorysheets;fins;determination
【摘要】:
【中国标准分类号】:Y31
【国际标准分类号】:85_040
【页数】:7P;A4
【正文语种】:英语
Product Code:SAE J1265
Title:Capacity Rating--Dozer Blades (Cancelled May 2003, Superseded by ISO 9246)
Issuing Committee:Mtc1, Loaders, Crawlers, Scrapers And Mounted Attachments
Scope:This standard applies only to straight, angling, semi-U, and U-blades for crawler and wheel tractors. It applies to angling blades only in the straight (not angled) position.This standard does not apply to angled blades or other tools used to side cast materials, nor does it apply to any blade with design features such as end plates extended beyond the blade face.This standard assumes the blade face to be flat and vertical, and does not consider the blade included volume (Figure 1).Although provisions are presented for some deviations, this standard is intended for rectangular blades whose width/height ratios are at least 1.0.PurposeThe purpose of this standard is to provide a uniform method for calculating the capacities of dozer blades. It is intended for relative comparisons of dozer blade capacity, and not for predicting capacities or productivities in actual field conditions. Such determinations would need to consider other parameters, such as efficiency of the blade design, tractor power, tractive effort, soil properties, terrain, operator technique, and duty cycle.Product Code:SAE AMS5042
Title:Steel, Sheet and Strip, 0.15 Carbon, Maximum Forming Grade (NONCURRENT Aug 2009)
Issuing Committee:Ams E Carbon And Low Alloy Steels Committee
Scope:This specification has been declared 鈥淣ONCURRENT鈥?by the Aerospace Materials Division, SAE, as of August 2009. It is recommended, therefore, that this specification not be specified for new designs.鈥淣ONCURRENT鈥?refers to those specifications which have previously been widely used and which may be required for production or processing of existing designs in the future. The Aerospace Materials Division, however, does not recommend these specifications for future use in new designs. 鈥淣ONCURRENT鈥?specifications are available from SAE upon request.
